cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1299
Views
0
Helpful
0
Replies

Cisco 887 QoS ?

usmansa1
Level 1
Level 1

Hi,

We have a problem with one of our offices in the remote side. It appears to me a congestion issue. We installed phones over there along with Cisco router (Cisco 887) and they are registered on cloud PBX. Our ISP gave 100 Mb  ADSL link (Dialer interface). The same link is used for Data traffic as well. In peak times they have complained for poor call quality. Now I have to deploy some QoS on outgoing interface that data should not impact calls. What I did is mark the traffic with IP address of PBX and allocate it the 75% bandwidth (On Demand basis). My configurations details are mentioned below. I tested it and it doesnt seems to be worked.
In-fact data traffic is also disturbed, can any one help in that ?
#
access-list 100 permit ip any host 101.43.31.291
access-list 100 permit ip host 101.43.31.291 any
#
class-map match-any VOIP
match access-group 100
#
policy-map voice-policy
class VOIP
priority 200
class class-default
fair-queue
#
interface dialer 0
service-policy output voice-policy

0 Replies 0
Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Innovations in Cisco Full Stack Observability - A new webinar from Cisco