Hi Guys, new member here. Studying for my CCNA and currently trying to get a Cisco 897 VAG-LTE working over my NBN connection. I can get a connection to the ISP and my test laptop can obtain and ping the default router but I can't get internet access. GigEth ports are set to access Vlan1 via switchport. A little help would go a long way.
Current configuration : 3636 bytes !
! Last configuration change at 01:25:50 UTC Sat Aug 1 2020 !
version 15.7 service timestamps debug datetime msec service timestamps log datetime msec no service password-encryption !
interface Cellular1 no ip address encapsulation slip !
interface Ethernet0 ip address dhcp ip access-group INBOUND-IN in no ip redirects no ip proxy-arp ip nat outside ip virtual-reassembly in !
interface GigabitEthernet0 no ip address !
interface GigabitEthernet1 no ip address !
interface GigabitEthernet2 no ip address !
interface GigabitEthernet3 no ip address !
interface GigabitEthernet4 no ip address !
interface GigabitEthernet5 no ip address !
interface GigabitEthernet6 no ip address !
interface GigabitEthernet7 no ip address !
interface GigabitEthernet8 no ip address duplex auto speed auto !
interface Vlan1 ip address 172.16.211.1 255.255.255.0 ip flow ingress ip flow egress ip nat inside ip virtual-reassembly in ip tcp adjust-mss 1300 !
interface Dialer0 no ip address !
ip forward-protocol nd no ip http server no ip http secure-server !
! ip dns server ip nat inside source list 1 interface Ethernet0 overload ip route 0.0.0.0 0.0.0.0 dhcp !
ip access-list extended INBOUND-IN deny ip 0.0.0.0 0.255.255.255 any deny ip 10.0.0.0 0.255.255.255 any deny ip 127.0.0.0 0.255.255.255 any deny ip 169.254.0.0 0.0.255.255 any deny ip 198.18.0.0 0.0.255.255 any deny ip 18.104.22.168 22.214.171.124 any deny tcp any any fragments deny udp any any fragments deny icmp any any fragments deny ip any any ttl range 0 1 permit icmp any any echo permit icmp any any echo-reply permit icmp any any time-exceeded permit icmp any any unreachable permit icmp any any packet-too-big permit udp any any eq bootpc deny ip any any ip access-list extended SSH-INBOUND permit tcp 192.168.0.0 0.0.255.255 any eq 22 deny ip any any !
line con 0 no modem enable line aux 0 line 2 no activation-character no exec transport preferred none stopbits 1 line 3 script dialer lte no exec line 8 no exec line vty 0 4 access-class SSH-INBOUND in exec-timeout 30 0 logging synchronous login transport input ssh !
scheduler allocate 20000 1000 ntp server au.pool.ntp.org !
Hi Everyone,I have 2 queries1. After we configure the IPSec VPN in a Cisco Router, how do we identify and check that the traffic is flowing through the tunnel? Are there any commands and ways to find it out?2. What are some of t...
Cisco Champion Radio · S7|E29 Increase Visibility and Enhance Security with Cisco AI Endpoint Analytics
Cisco is on a journey to making networking smarter with artificial intelligence and machine learning. The latest stop in this journey, Cisco AI...
Community Live video- Introduction to Smart Licensing on Catalyst Switches
(Live event - formerly known as Webcast- Thursday 30 July, 2020 at 10 am Pacific/ 1 pm Eastern / 7 pm Paris)
This event had place on Thursday 30th, July 2020 at 10hrs PDT&nb...
To participate in this event, please use the button to ask your questions
This topic is a chance to clarify your questions about smart licensing on Cisco Catalyst switches, including 9000 (9200, 93...