Hello fellows, I have a little issue with VLANS.
I have FGT 80F and 9200
Example configuration:
on FGT:
- ports 1-6 are in switch with IP on internal, VLAN 10 and VLAN 20.
internal IP: 172.16.100.1/24
VLAN 10 IP: 192.168.16.0/22
VLAN 10 is allowed to access VLAN 20
on 9200:
VLAN 1 MGMT - 172.16.100.2/24
ports 40-48 - trunk with allowed VLANs 1,10,20
ports 1-10 VLAN 10 access mode VLAN 10
When I connect my PC to ports that belongs to FGT, I can access switch MGMT and FGT itself, but when I connect my PC to Switch, I can only access to FGT but cannot to switch.
Can you tell me please why?
Thanks a lot!
