cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1204
Views
0
Helpful
5
Replies
Highlighted
Rising star

Cisco Catalist 3850 Stack Status SNMP OID

Hi, I can't find SNMP OID for cisco 3850 stack status. To be honest I can't find any IOD's. Because SNMP WALK gives me range .1.0.8802.1.1.2.....

But snmp navigator does not know this OID's. How can I determine what each oid means? 

 
________________________________________________________
Если ответ понравился, ставь звёздочку. Если ответ помог решить твою проблему, утверди его в качестве решения
1 ACCEPTED SOLUTION

Accepted Solutions
Highlighted
Rising star

I found the correct OID's
It is turn out OID for first switch is 1.3.6.1.4.1.9.9.500.1.2.1.1.6.1000 for second is 1.3.6.1.4.1.9.9.500.1.2.1.1.6.2000 and so on
________________________________________________________
Если ответ понравился, ставь звёздочку. Если ответ помог решить твою проблему, утверди его в качестве решения

View solution in original post

5 REPLIES 5
Highlighted
Beginner

Try OID 1.3.6.1.4.1.9.9.500.1.2.1.1.6 for the switch stack status. Instace 1001 is switch 1, 2001 is switch 2, etc.. A value of 4 means the switch is Up. More info: http://oidref.com/1.3.6.1.4.1.9.9.500.1.2.1.1.6

You cal also use OID for serial numbers in a switch stack. When there is a missing serial number for a switch then it means the switch is down - 1.3.6.1.4.1.9.5.1.2.19

** Please rate this post or accept the solution if it helped! :) **
Highlighted

These OID's work only on cisco 3750. But it does not work on 3850.
That's why I created this post.
As I have already said above snmpwalk returns oid range started from .1.0.8802.1.1.
It looks like device does not have standard cisco oid (1.3.6.1.4.)
________________________________________________________
Если ответ понравился, ставь звёздочку. Если ответ помог решить твою проблему, утверди его в качестве решения
Highlighted

Weird as people are saying they are seeing standard OID: https://community.cisco.com/t5/network-management/3850-stack-not-displayed-correctly-in-ciscoview-6-1/td-p/2564419

 

Also check this link see if its any help:

https://community.ipswitch.com/s/question/0D53600000fshEFCAY/looking-for-powerstack-oid-for-cisco-3850

 

Do you have a syslog server? Every time a stack member goes down there will be a syslog message logged. You can use syslog alerting instead . Thats what I'm using for monitoring our 3850 stack status.

 

 

 

 

 

 

** Please rate this post or accept the solution if it helped! :) **
Highlighted

Unfortunately these links do not help.
We have a syslog, but we don't use it as active monitoring. It uses only for event investigations
________________________________________________________
Если ответ понравился, ставь звёздочку. Если ответ помог решить твою проблему, утверди его в качестве решения
Highlighted
Rising star

I found the correct OID's
It is turn out OID for first switch is 1.3.6.1.4.1.9.9.500.1.2.1.1.6.1000 for second is 1.3.6.1.4.1.9.9.500.1.2.1.1.6.2000 and so on
________________________________________________________
Если ответ понравился, ставь звёздочку. Если ответ помог решить твою проблему, утверди его в качестве решения

View solution in original post

Content for Community-Ad