Cisco Network Assistant 5.8 with old switches

[mlangdon34]

Hello,

Justed upgraded to CNA 5.8(6), when I try to configure any port's VLAN of one of our old switches (Catalyst 3548-XL IOS 12.0(5)WC17)

I am not able to do it anymore. It just shows the error this message :

Error: Modify Port Mode com.cisco.cpnm.features.dsbu.c3500.vlan.C3500Vlan cannot be cast to com.cisco.features.dsbu.defn.vlan.CommonVlan

Is there any workaround ?

Thank you

Regards,

Marc

[rajevasu]

Hi Marc,

     Could you please upgrade to CNA 5.8(7) and try to reproduce the issue. If you are able to reproduce, could you please list the show inventory output and sh version output, so that I can try from local lab setup.

Thanks & Regards,

Rajesh Vasudevan

[mlangdon34]

Hi Rajesh,

Just upgraded to CNA 5.8(7) and I can reproduce the issue :

sh ver output :

Cisco Internetwork Operating System Software

IOS (tm) C3500XL Software (C3500XL-C3H2S-M), Version 12.0(5)WC17, RELEASE SOFTWARE (fc1)

Copyright (c) 1986-2007 by cisco Systems, Inc.

Compiled Tue 13-Feb-07 15:04 by antonino

Image text-base: 0x00003000, data-base: 0x00352924

ROM: Bootstrap program is C3500XL boot loader

etna uptime is 3 minutes

System returned to ROM by power-on

System image file is "flash:c3500xl-c3h2s-mz.120-5.WC17.bin"

cisco WS-C3548-XL (PowerPC403) processor (revision 0x01) with 16384K/1024K bytes of memory.

Processor board ID FAB0540Q3JR, with hardware revision 0x00

Last reset from power-on

Processor is running Enterprise Edition Software

Cluster command switch capable

Cluster member switch capable

48 FastEthernet/IEEE 802.3 interface(s)

2 Gigabit Ethernet/IEEE 802.3 interface(s)

32K bytes of flash-simulated non-volatile configuration memory.

Base ethernet MAC Address: 00:07:85:93:EB:C0

Motherboard assembly number: 73-3903-11

Power supply part number: 34-0971-01

Motherboard serial number: FAB0540D050

Power supply serial number: PAC053402FJ

Model revision number: N0

Motherboard revision number: B0

Model number: WS-C3548-XL-EN

System serial number: FAB0540Q3JR

Configuration register is 0xF

:

Thanks for your help

Regards,

Marc

[rajevasu]

Hi Marc,

     We are not having the WS-C3548-XL device in our local lab setup to reproduce the issue. Could you please attach the screen shot when the error is displayed in CNA and their logs, so that we can try to find out the solution.

Thanks & Regards,

Rajesh Vasudevan

[mlangdon34]

Hi Rajesh,

Please find attached the screenshot and the lastest lines of logs

Regards,

3500 device type supports 802.1P

to load RB:featureCommonRB

to load RB:dsbuCommonRB

to load RB:c3500RB

++: DEBUG:  : NEDS: NetworkEntity  discovered by com.cisco.cpnm.features.dsbu.c3500.discovery.C3500NEDM@18feca1

++: DEBUG:  : CMS: cluster data polling interval preference is 30 minutes

++: DEBUG:  : CMS: led data polling interval preference is 10 minutes

++: DEBUG:  : CMS: ip addresses polling interval preference is 10 minutes

to load RB:featureCommonRB

to load RB:dsbuCommonRB

to load RB:c2960RB

++: DEBUG:  : NEDS: NetworkEntity  discovered by com.cisco.cpnm.features.dsbu.c2960.discovery.C2960NEDM@2219b4

WindowEntryParser: Unknown tag entry

to load RB:featureCommonRB

to load RB:dsbuCommonRB

to load RB:c2960RB

++: DEBUG:  : NEDS: NetworkEntity  discovered by com.cisco.cpnm.features.dsbu.c2960.discovery.C2960NEDM@2219b4

RPS notification processing

java.lang.ClassCastException: com.cisco.cpnm.features.dsbu.c3500.vlan.C3500Vlan cannot be cast to com.cisco.cpnm.features.dsbu.defn.vlan.CommonVlan

    at com.cisco.cpnm.features.dsbu.defn.vlan.TrunkDetailsTask.getNativeVlans(TrunkDetailsTask.java:1651)

    at com.cisco.cpnm.features.dsbu.defn.vlan.TrunkDetailsTask.updateMirrorFromDevice(TrunkDetailsTask.java:514)

    at com.cisco.cpnm.frmwrk.gen.wd.WDContainer.updateMirrorFromDevice(WDContainer.java:590)

    at com.cisco.cpnm.frmwrk.gen.wd.WDWidget$2.run(WDWidget.java:1179)

    at java.lang.Thread.run(Unknown Source)