Buy or Renew
Buy or Renew
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Search instead for 
Did you mean: 
cancel
Start a conversation
2710
Views
1
Helpful
1
Replies

Cisco PI 2.0 changing server's IP address

Go to solution
oizetbegovic
Level 1
Level 1

‎02-04-2014 07:08 AM

Hi everyone,

I’m using Prime Infrastructure 2.0 and I’d like to know can PI server's IP address be changed? If it can be, what procedure has to be followed?

Thanks!

Labels:
0 Helpful
1 Accepted Solution

Accepted Solutions

Go to solution
Vinod Arya
Cisco Employee
Cisco Employee

‎02-04-2014 07:14 AM

It should not be complex job! You just need to stop the services, change the IP of the GigabitEthernet0 interface in the configuration and start the services back up. Use this guide to change IP address on PI :

http://www.cisco.com/en/US/docs/wireless/prime_infrastructure/2.0/command/reference/cli20_appendix_011.html#wp8796098100

-Thanks

Vinod

**Rating Encourages contributors, and its really free. **

-Thanks Vinod **Rating Encourages contributors, and its really free. **

View solution in original post

1 Reply 1