Cisco PI 2.0 changing server's IP address

[oizetbegovic]

Hi everyone,

I’m using Prime Infrastructure 2.0 and I’d like to know can PI server's IP address be changed? If it can be, what procedure has to be followed?

Thanks!

[Vinod Arya · Accepted solution]

It should not be complex job! You just need to stop the services, change the IP of the GigabitEthernet0 interface in the configuration and start the services back up. Use this guide to change IP address on PI :

http://www.cisco.com/en/US/docs/wireless/prime_infrastructure/2.0/command/reference/cli20_appendix_011.html#wp8796098100

-Thanks

Vinod

**Rating Encourages contributors, and its really free. **