11-08-2015 04:14 AM
Dears,
did any one install Cisco Prime Infra. version 3.0 or any version on ESXi 6.0 ??
i know it is not recommanded from cisco but i dont have hosts less than that in the enviroment here.
thanks
Mohamed
11-17-2015 05:43 AM
http://www.cisco.com/c/en/us/td/docs/net_mgmt/prime/infrastructure/3-0/quickstart/guide/cpi_qsg.html
- ESX 6.0 is unsupported, meaning that it may work, but if there are issues, you are on your own.
M.
01-06-2016 02:23 AM
Hi marce1000,
Where can you see this version is unsupported ?
I can see that the minimum requirements is ESXi 5.1 or 5.5.
Does anybody have already tested it ?
Thank you in advance.
Florent
01-06-2016 02:33 AM
hello flokandula
I am running now the Prime V 3.0 on ESXI 6.0 .... but it is not working right .... meaning that there are responses that is not correct , so my recommendation is to stick to cisco recommendation too
thanks
Mohamed
01-06-2016 05:46 AM
Prime Infrastructure 3.0 is only supported on ESXi 5.1 or 5.5. The syntax on this table:
http://www.cisco.com/c/en/us/td/docs/net_mgmt/prime/infrastructure/3-0/quickstart/guide/cpi_qsg.html#pgfId-121836
...is a bit misleading. The first data row are not minimums but rather the required versions of which you choose one or the other. The remaining rows are minimums.
Table 1 in the product data sheet states it more clearly:
http://www.cisco.com/c/en/us/products/collateral/cloud-systems-management/prime-infrastructure/datasheet-c78-735696.html?cachemode=refresh
01-07-2016 12:18 AM
Dear all,
Thank you for your replies. Now, I have my answer :).
Regards,
Florent
01-07-2016 05:46 AM
You're welcome.
Please mark your question as answered if it has been.
02-23-2016 06:23 AM
Hi Marvin,
When do you expect that ESXi 6.0 will be supported?
And also: When (release?) do you expect Hyper-V will be supported?
Kind regards,
Ad Olsthoorn
02-23-2016 05:49 PM
I'd be surprised if they ever support Hyper-V for PI. There's just not that much demand for it overall on what is already a product with not the greatest market share.
I've heard there is supposed to be a 3.1 release coming out in the next month or two. Perhaps we will see that add ESXi 6.0 support.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: