cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1166
Views
0
Helpful
2
Replies

Cisco Prime 3.x. Alarm Status. Auto-clear from the device not working.

diesel315
Beginner
Beginner

Good afternoon, everybody.
Installed Cisco PI 3.0 (Build 3.0.0.0.78) + patch PI 3.0.2 Update 02

According to the instruction, if the alarm triggered, after the elimination of the conditions of occurrence of alarm notification is cleansed.

A cleared alarm can involve any of the following:
• Auto-clear from the device—The fault is resolved on the device and an event is triggered for the device.
For example, a device-reachable event clears a device-unreachable event. This, in turn, clears the
device-unreachable alarm.

But in fact, the notification is not cleared on the main page (dashboard).

Can anyone help with this problem?

2 Replies 2

strumaxom87
Beginner
Beginner

Hello,

it looks like as a problem on this discussion:

https://supportforums.cisco.com/discussion/12733941/prime-infrastructure-30-problem#comment-11122861

New bugID : CSCuy28245 - AP Alarms not clearing

Thank you.
Very sad. Hike many faced problems after the update, and how to resolve the problem of no one knows.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: