04-29-2017 10:07 AM
Hi ,
Can anybody please guide me to a link for the above activity.How can we delete the existing files from the disks to make a fresh reinstall.
How to optimise the server as the application performance is slow.
Regards,
Solved! Go to Solution.
04-29-2017 11:36 PM
http://www.cisco.com/c/en/us/td/docs/net_mgmt/prime/infrastructure/3-0/hardware_install/guide/Cisco_PI_Hardware_Appliance_Installation_Guide/cpiInstallUCS.html
http://www.cisco.com/c/en/us/td/docs/net_mgmt/prime/infrastructure/3-0/hardware_install/guide/Cisco_PI_Hardware_Appliance_Installation_Guide/cpiInstallUCS.html#pgfId-78400
M.
04-29-2017 11:36 PM
http://www.cisco.com/c/en/us/td/docs/net_mgmt/prime/infrastructure/3-0/hardware_install/guide/Cisco_PI_Hardware_Appliance_Installation_Guide/cpiInstallUCS.html
http://www.cisco.com/c/en/us/td/docs/net_mgmt/prime/infrastructure/3-0/hardware_install/guide/Cisco_PI_Hardware_Appliance_Installation_Guide/cpiInstallUCS.html#pgfId-78400
M.
04-30-2017 02:30 AM
Thanks Marce for reply,
I tried the procedure on two server, the secondry server has successfuly completed all the steps.
But the primary C220 is not accepting F6 to go into setup.I tried a number of times.
04-30-2017 03:17 AM
>But the primary C220 is not accepting F6 to go into setup.I tried a number of times.
How is this observerd, is there an error (e.g,) ; if so which one (e.g.) ?
M.
04-30-2017 05:16 AM
Created the vDVD again in KVM console and worked fine.
Thanks for providing the links.
04-30-2017 05:19 AM
Do we need to do any other tasks to optimize the server and delete old installation data from the hard disks ?
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: