01-23-2018 08:54 PM - edited 03-01-2019 06:22 PM
I'm using Cisco Prime Infrastructure v3.3 to manage our wired infrastructure. I would like to set the backup schedule of my devices configuration and IOS image. Does we can backup that into the external servers such as FTP or TFTP?
Solved! Go to Solution.
01-23-2018 11:47 PM
Hi,
Yes you can take the backup of Prime Infrastructure in two ways
Schedule backup: By default Prime infrastructure server takes its backup by itself after 24 hours. its saves its backup in a complete file in default local backup repository memory folder.
Manullay; You can also take the backup manually using TFTP through Winscsp any time. this can take longer time than Auto backup and saves in the same memory.
Key to Remember:
In order to take the backup manually you must have SSH and shell access of Prime Infrastructure
01-23-2018 10:55 PM
Hi
Prime run this service as well. It is easier use Prime as the backup server and schedule accordingly.
-If I helped you somehow, please, rate it as useful.-
01-23-2018 11:46 PM
01-23-2018 11:47 PM
Hi,
Yes you can take the backup of Prime Infrastructure in two ways
Schedule backup: By default Prime infrastructure server takes its backup by itself after 24 hours. its saves its backup in a complete file in default local backup repository memory folder.
Manullay; You can also take the backup manually using TFTP through Winscsp any time. this can take longer time than Auto backup and saves in the same memory.
Key to Remember:
In order to take the backup manually you must have SSH and shell access of Prime Infrastructure
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide