Cisco Prime Infrastructure - Monitoring Firepower SNMPv3 - Alarms message Authentication failed for request from 'Unknown'
is anybody here who use or try Cisco Prime Infrastructure to Monitoring Firepowersystems?
I know Cisco Firepower ist not in supported Device List of PI, but Cisco provide for FXOS a MIB Package which files can upload to Prime and used to Custom Polling with monitoring Polices. With this collect data you can create Generic Dashlets.
But if Cisco Prime should receive SNMPv3 Traps there is probaly the problem that a Minor Alarm message with: Authentication failed for request from 'Unknown' show in Dashboard.
You can assume that the configuration for SNMPv3 in both direction is correct. One direction seems to work fine.
What can I do to find out the correct problem with PI?
I find a Bug for PI 3 which describe basically the same Problem but for other devices.
“Use Serviceability Features to Troubleshoot your Cat9K as a Cisco TAC Engineer”
This special event is open only to Cisco Customers and Partners.
Many pages in the Cisco Community are accessible only to Cisco customers, partners, or logged in ...
Cisco Champion Radio · S7|E40 From SD-WAN to SASE: Speed Up and Secure SaaS Internet Apps
The changing global environment has transformed how enterprise users connect to applications. The SASE architecture delivers important networking and securit...
Hi guys,Have a question regarding spanning tree and way its supposed to work when there is a redundant path in fiber daisy-chained switches. Root switch for all vlans is connected via fiber link to the first of the daisy-chained switches. Below is same co...
Hi Experts, I am designing a Ring topology to connect all all DRs and back to CR sites. Do I need to consider what is the maximum DRs which I am able to connect in the Ring and I am thinking does the latency will be affected if more sites will j...
HiI have an issue with a pppoe command in a subinterface. I'm using a c1841-advipservicesk9-mz.124-25f.bin IOSand I have a problem with the command pppoe-client dial-pool-number6. I can configure in a interface but I can't in a subinterface. Any...