Cisco Prime Infrastructure no space for upgrade to 3.0

[rshulse55]

I am running into issues with trying to upgrade from 2.2 to 3.0 of Prime Infrastructure.  I get this error message.

Initiating Application Upgrade...

ERROR : Filesystem is more than 75% full
Run 'ncs cleanup' to free up space, before attempting to run upgrade again
Aborting application upgrade ...

I have ran NCS cleanup, and that did not help the issue.  I do see that i am out of space here:

Disk Source	Available Space(KB)	Used Space(KB)	% Used
/dev/mapper/smosvg-rootvol	3432400	330480	9
/dev/mapper/smosvg-varvol	2971868	791012	21
/dev/mapper/smosvg-optvol	38179676	160472116	81
/dev/mapper/smosvg-tmpvol	1493304	373068	20
/dev/mapper/smosvg-usrvol	5276576	1285868	20
/dev/mapper/smosvg-recvol	84616	5664	6
/dev/mapper/smosvg-home	84608	5672	6
/dev/mapper/smosvg-storeddatavol	9238552	153700	2
/dev/mapper/smosvg-altrootvol	84616	5664	6
/dev/mapper/smosvg-localdiskvol	42140404	184408	0
/dev/sda2	88340	5690	6
/dev/sda1	452368	17876	4
tmpfs	4362964	1721020	28

My question is what can I do to alleviate this? 

[david_nyring · Accepted solution]

hey

if it virtuel ou could follow this guide 

http://blog.42.be/2013/01/increasing-diskspace-on-cisco-prime.html

i just incress the size with this guide becaus of the backup need 25% space left :)

other wise it complain 

[rshulse55]

Worked like a champ!  Thank you