Cisco Prime Infrastructure Unable to collect configuration and runtime status of stacked switch Error in Inventory
In Cisco Prime Infrastructure 2.2 I have several switches in different locations that give a partial collection failure with the following error:
Unable to collect configuration and runtime status of stacked switch.
Monitoring of Physical Inventory details
Unexpected error. See the log file inventory.log for details.
Any idea what could be causing this issue? My credentials appear ok, but the Prime does not seem to be able to get a full collection including they do not get the current configuration for the archive. The models I am seeing include 3750's, 2960C's and 3560 switches. (The strange thing is the error references stacked switches but some of these aren't even stack capable).
Cisco Digital Network Architecture Center Modules(Design Module)Part.2In this article, we are going to talk about the Cisco Digital Network Architecture Center design Module. Cisco DNA Center gives us the flexibility and availability to con...
Connectivity Design considerations and recommendation
1.Management Access connectivity
If there is a dedicated OOB management path, consider connecting to CIMC and MGMT port.
If OOB path is not available, Connect the dedicated Management port to LAN Swi...
Cisco Digital Network Architecture Center Modules In this article, we are going to talk about Cisco Digital Network Architecture Center design Module. Cisco DNA Center gives us the flexibility and scalability to configure multiple fabric sites a...
This document provides an overview of DPDK and steps to configure and troubleshoot DPDK for OVS in NFVIS.
DPDK stands for Data Plane Development Kit, is a set of libraries that improves data plane performance.DPDK description