11-27-2017 02:44 AM - edited 03-01-2019 06:16 PM
Hi,
I have a question about integration Primie Infrastruture with Cisco Meraki devices. Is it possible?
I read in MERAKI documentation that it is possible, but according to the PRIME documentation - it is not possible...
Solved! Go to Solution.
11-27-2017 10:21 AM
As I send you in private message, on Prime 3.2 doc, they mention Meraki as well as supported device.
https://www.cisco.com/c/en/us/td/docs/net_mgmt/prime/infrastructure/3-0/release/notes/cpi_rn.html
-If I helped you somehow, please, rate it as useful.-
11-27-2017 03:01 AM
Hi @User24571
Could share the doc that says is not possible?
This doc Here says it is possible and I think is possible. Prime works with SNMP so there's no reason to not work. It is possible to monitor even non Cisco device on Prime.
-If I helped you somehow, please, rate it as useful.-
11-27-2017 04:01 AM - edited 11-27-2017 04:06 AM
Hi Miranda,
I mean on this document: LINK. In this excel file there is no information about Meraki devices (I have Cisco Prime 3.2)
11-27-2017 05:10 AM
- Great to see, this document mentions PI3.3; can't see it on the download site however....
M.
11-27-2017 10:21 AM
As I send you in private message, on Prime 3.2 doc, they mention Meraki as well as supported device.
https://www.cisco.com/c/en/us/td/docs/net_mgmt/prime/infrastructure/3-0/release/notes/cpi_rn.html
-If I helped you somehow, please, rate it as useful.-
11-27-2017 11:50 PM
Thanks Miranda!
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide