One of my customers has a managed LAN and WAN. Today, he is using LMS 4.0.1 and WCS for Network Control.
The configuration of the devices is in such a way that all the snmp-traps are sended to the LMS and the umbrella system by the provider (Switches only), the WCS are sending all the traps directly to the provider system.
The WCS (5 devices) are sending about 5000 traps a day averagly. That's too much (only a few of these traps are relevant).
Is there a possibility - by upgrading to NCS - to filter these messages (e.g. by serverity level) bevor sending to the NMS?
Or is there a possibility with the combination of LMS 4.2 and NCS to do this?
Where can I find some informations about the snmp trap handling of the NCS; the possibilities of filtering and/or the combination of LMS 4.2 and NCS?
Starting from NFVIS 3.12 versions, the deploy option does not depict all the SR-IOV VFs(Virtual Functions) available in a physical interface. This change is introduced as (i) the number of VFs of ENCS platform on LANs side is increased to 24 and (ii) the...
Community Live- Getting to know Cisco SD-WAN
(Live event - formerly known as Webcast- Wednesday December 11, 2019 at 10 am Pacific/ 1 pm Eastern / 7 pm Paris)
This event will have place on Wednesday 11th, December 2019 at 10hrs PDT
Hi alli have 40 spots (40 Ethernet cables for computers coming out from switch) and i want each of these spots to have fix IP which means if i swap the computer the IP of certain spot remain the same.example : at spot 30 i have IP address of 192.168.22.40...
Cisco DNA Center nodes lost network connectivity. Cannot SSH to nodes. Cluster and Enterprise port connected to Cisco Nexus Switches.
Cisco DNA Center kernel logs showing hung queue error messages. "sudo cat /var/log/kern.log"
Cisco Digital Network Architecture Center Modules(Design Module)Wireless Part.In this article, we are going to talk about Cisco Digital Network Architecture Center design Module, Wireless Part.Cisco DNA Center gives us the flexibility and scalability to c...