I am trying to play around with NCS.
I have ESXi box (4.1 and 5) and have tried using both ver 1.0 and 1.1 of the appliance.
The error i get on boot up is
Failure during Network Control System startup. Check launchout.log for details
How can i check that logfie?
Can you tell me what your specs are for your VM? I tried installing it on a dual processor, 4GB ram, 100GB vm with 4.1 esxi+
Is there another fix for this issue? I have more then the required amount of RAM and CPU, 12GB RAM and 4 CPUs in an ESXi 4.1 environment.. Still get the error "Failure during Network Control System startup. check launchout.log for details"
Also how do you check that log file?
same problem here.
after problems during upgrade from ncs 1.0 to 1.1 the system (VA) does not start anymore. Where can we check the mentioned "launchout.log" file?
Thanks for any help.
Of course I forgot to write it down or wrote it down in the wrong spot :>)
If I remember correctly my issue was the command I used to import my data from the WCS into the NCS. I missed the ending of the command but still looked as though the import worked but it didn't and I got the same error failure during startup.
If I find the exact command I will post it.
after all I found the command
It generates a file "ADElogs.tar.gz" which also does not(!) contain a "launchout.log". :-(
By now, our NCS is unstartable. Our Supporter is going to rehost the NCS License to a new VA.
With this expierience I can recommend to take snapshots from the VA especially before trying to upgrade.
good luck everyone else.
to whom it may concern:
"backup-logs NCS repository
produces an tar.gz-archive wherein the launchout.log can be found.
hope that helps someone.
Have you check that maybe it is the symptom of this caveat: CSCto13373?
you can't use the copy command, you have to use the backup command
example "backup-logs mybackup repository myrepository"
You can also download them from the web gui under the logging, once it is up.
NCS Error --> "Failure during Network Control System startup. Check launchout.log for details."
Checking in launchout.log, it says
"Start failed. Initiating shutdown. Please check logs/Startup.log"
There is no logs/Startup.log in the backup-logs dump.