cisco PRIMER LMS 4.1 and NEXUS 7000

[mohammad abdul jawad]

is the LMS 4.1 supports Nexus 7000 baundle ?

[Vinod Arya · Accepted solution]

Cisco Prime LMS 4.1 support Nexus 7K and other Data Center Switches but for some features. following is the Summary :

Data Center Switches

The following features are supported:

• Network Topology Layer 2 Services
• User Tracking (Nexus 7K without FEX)
• Fault Management
• Inventory Collection (Nexus 7K, Nexus 5K with FEX)
• Software Images Import from: Cisco.com, Device, File System, Network, URL
• Upgrade Analysis from: Cisco.com, Repository
• Software Image Import Connection Protocols: SNMP
• Software Image Import Transfer Protocols: TFTP
• Software Image Types for Distribution: System Software, Bootloader
• Software Image Distribution Transfer Protocols: TFTP
• Software Image Distribution Connection Protocols: SNMP
• Configuration Deploy Protocols: TELNET, SSH
• Configuration Fetch Protocols: TELNET, SSH
• CiscoView
• EW-2 [15.0(1)M2]
• Non-Admin VDC ( Applicable only  for Nexus 7K devices)

The following features are not supported:

• User Tracking (Nexus 1K, 4K, 5K and 7K with FEX), VLAN Management, VRF Lite, LANE Management
• Configuration Deploy Protocols: HTTPS, SCP, TFTP, RCP
• Configuration Fetch Protocols: HTTPS, SCP, TFTP, RCP
• Software Distribution by: Advanced flow, Image, Remote Staging
• Software Repository Synchronization
• CiscoView -  [ 1.3.6.1.4.1.9.12.3.1.3.840, 1.3.6.1.4.1.9.12.3.1.3.903, 1.3.6.1.4.1.9.12.3.1.3.907, 1.3.6.1.4.1.9.12.3.1.3.930]

For more details check :

http://www.cisco.com/en/US/docs/net_mgmt/ciscoworks_lan_management_solution/4.1/device_support/table/lms41sdt.html#Data Center Switches

-Thanks

[mohammad abdul jawad]

thanks for helping