Cisco VPN Client and Windows 10

[Gregory Karidis]

This is the right way for running Cisco vpn client on windows 10 :

It works for me.

http://www.puryear-it.com/blog/2015/08/18/install-cisco-vpn-client-windows-10/

[rvarelac]

Hi Gregory , 

The Cisco IPSEC client is currently out of support and is not supported on Windows 8 or Windows 10. 

http://www.cisco.com/c/en/us/products/collateral/security/vpn-client/end_of_life_c51-680819.html

Instead you can use the Anyconnect client or the L2TP windows built-in client. 

-Hope it helps-

Randy

[Gregory Karidis]

Hi rvarelac,

Can i use windows built in client for L2tp/ipsec with xauth and 3DES?

Also i use cisco 867VAe-K9 and i think anyconnect is not a option for me and with this setup.

[rvarelac]

Here is an example of the L2TP configuration for Windows 8  (should works as well for Windows 10) 

https://supportforums.cisco.com/document/9878401/l2tp-over-ipsec-cisco-ios-router-using-windows-8

Anyconnect is also supported on routers , there is not problem with your platform it just might need to have the SSL license installed. 

http://www.cisco.com/c/en/us/support/docs/routers/3800-series-integrated-services-routers/110608-ssl-ios-00.html

-Randy-

[Gregory Karidis]

Thank you rvalerac.