CiscoWorks LMS 4.0.1 + Catalyst 3750X - User Tracking Issue
We just deployed some Catalyst 3750X-48PF-L switches. I noticed that the user tracking report doesn't work normally.
The switches have C3KX-10Gb NM modules, and all access port are 1 Gbit. But in the User Tracking report, I see devices found on Fa0/43 for example (this is because the previous switch was a Catalyst 2960. I deleted the old switch and add the new 3750X, so this could not be the cause of the problem).
I installed all the patches that are available for LMS 4.0.1.
Any old entries won't automatically be removed until they age out (I believe 90 days is the default time). You can override / modify that by going in to Admin > Network > Purge Settings > User Tracking Purge Policy.
If that fails, you could re-initaitlize the User Tracking db and re-run a Major Acquisition to refresh everything but that would also have the effect of deleting all historical UT entries you may want to keep.
To reinitialize a db, please see the procedures posted here. ANI is the db used by User Tracking.
Hello All, We have Cisco 5545-x & we running SSLVPN anyconnect. when we do tracert 1st hop is showing public of outside interface. we have configure tunnel route toward inside. but when do same think form other firewall it show next hope of ...
Cisco SD-WAN Cloud OnRamp allows you to simplify and secure connectivity to cloud applications and public clouds. Interested in testing out the latest Cisco Cloud OnRamp solutions?
Sign up to try out various use cases with the Cisco SD-WAN Cloud ...
“Use Serviceability Features to Troubleshoot your Cat9K as a Cisco TAC Engineer”
This special event is open only to Cisco Customers and Partners.
Many pages in the Cisco Community are accessible only to Cisco customers, partners, or logged in ...
Cisco Champion Radio · S7|E40 From SD-WAN to SASE: Speed Up and Secure SaaS Internet Apps
The changing global environment has transformed how enterprise users connect to applications. The SASE architecture delivers important networking and securit...
Hi guys,Have a question regarding spanning tree and way its supposed to work when there is a redundant path in fiber daisy-chained switches. Root switch for all vlans is connected via fiber link to the first of the daisy-chained switches. Below is same co...