cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

1300
Views
0
Helpful
5
Replies
Highlighted
Beginner

CNA v5.8.7 and v5.8.8.1 can't add c2960x to community

In CNA 5.8.7 or 5.8.8.1, I can not add any switch WS-C2960X-48TS-L to the community.

Using Discover like a single device by IP address and device IP, the CNA sends this error:

Error: Create Community

Unsupported Device Type: WS-C2960X-48TS-L

Cannot add device 10.x.y.z to community

How to proceed?

Everyone's tags (1)
2 ACCEPTED SOLUTIONS

Accepted Solutions
Highlighted
Hall of Fame Guru

CNA v5.8.7 and v5.8.8.1 can't add c2960x to community

You'll need to watch for a new release of CNA that adds 2960X support. Until then, you cannot manage it with CNA.

CNA tends to be updated 2-3 times a year adding new device support. Right now the release notes show it indeed does not manage the 2960X.

View solution in original post

Highlighted
Beginner

CNA v5.8.7 and v5.8.8.1 can't add c2960x to community

Hi,

    I am Srikanth from CNA dev engineer team. C2960X and C2960XR devices will be supported in CNA feature release(i.e CNA589). CNA589 is going to release by end of November.

Thank you

Regards,

Srikanth Achanta

View solution in original post

5 REPLIES 5
Highlighted
Hall of Fame Guru

CNA v5.8.7 and v5.8.8.1 can't add c2960x to community

You'll need to watch for a new release of CNA that adds 2960X support. Until then, you cannot manage it with CNA.

CNA tends to be updated 2-3 times a year adding new device support. Right now the release notes show it indeed does not manage the 2960X.

View solution in original post

Highlighted
Beginner

CNA v5.8.7 and v5.8.8.1 can't add c2960x to community

Hi,

    I am Srikanth from CNA dev engineer team. C2960X and C2960XR devices will be supported in CNA feature release(i.e CNA589). CNA589 is going to release by end of November.

Thank you

Regards,

Srikanth Achanta

View solution in original post

Highlighted
Beginner

CNA v5.8.7 and v5.8.8.1 can't add c2960x to community

Thanks,

I will wait the new release with very big expectations.

Highlighted
Beginner

CNA v5.8.7 and v5.8.8.1 can't add c2960x to community

Hi  from University of Ruse, Bulgaria. I installed the new version of Cisco  Assistant and noticed a problem. We have new switches WS-C2960X-24TS-L.  CNA view this devices in Front Panel like Catalyst 2960-S. Screen of  the problem -

http://www.uni-ruse.bg/.ntk/cisco_CNA_5_8_9-University_of_Ruse.PNG

Highlighted
Cisco Employee

CNA v5.8.7 and v5.8.8.1 can't add c2960x to community

Hi Nikolay ,

It seems this is an issue , we have filed an defect for the same ,

CSCum09576  , We will fix this and let you know the updates

CreatePlease to create content
Content for Community-Ad