08-20-2008 04:40 AM
I have been getting the following error when I archive my configs: CM0151 VLAN RUNNING Config fetch failed. The configuraiton file is backed up fine, its just the vlan.dat file that does not work. my transport protocols are Telnet, then TFTP. I am using RME 4.1.1
08-20-2008 07:44 AM
What type of device is this? Does it have a vlan.dat on flash?
08-20-2008 08:06 AM
Thats the thing. Those switches do not have a vlan.dat file, because there is no vlans configured on those devices.
08-20-2008 08:39 AM
Then this is my bug, CSCsq66458. If you contact TAC, you can get a patch for RME 4.1.1.
08-20-2008 11:07 AM
I opened a TAC case on this for them to send me the patch. Thanks.
04-10-2009 05:56 AM
I am having the same problem...I am running RME 4.2.0.
Is there still a bug?
04-10-2009 06:02 AM
To fix this you have to copy a vlan.dat file from a switch that has one on the flash. Then TFTP that vlan.dat file to the switches that do not have one. That is what fixed my problem.
04-10-2009 06:17 AM
Thanks. Are you talking about a default vlan.dat file?
04-10-2009 06:49 AM
yes
04-10-2009 06:49 AM
Did you get instructions from TAC on how to do this?
04-10-2009 06:56 AM
Its just mainly tftp a vlan.dat file from another switch, then tftp that file to the switches that do not have one. They do not have a patch out for this yet, so this is a work around.
04-10-2009 07:01 AM
OK, Thanks. I am assuming by your response that ANY vlan.dat file will do? I want to make sure before I do this. I do not want to 'break' anything when I do this. Thanks again.
04-10-2009 11:28 AM
I found another work around. Simply create a VLAN and ust keep it shutdown. I used VLAN 2 and issed the shutdown command, resync'd the archive and voila.
04-10-2009 11:33 AM
The patch is certainly available, and has been given out to a number of customers. However, it is now out of date. If you have a newer version of the SharedDcmaCatIOS package, my patch will overwrite it, and could break other things. Therefore, the workaround is recommended now until LMS 3.2 comes out this summer.
04-11-2009 01:49 AM
The creation of a vlan and a name worked for me too.
vlan 2
name TEST
and it created a VLAN.dat file in flash.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: