cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
193
Views
0
Helpful
2
Replies
Highlighted
Beginner

Configure Cisco 9300 with wireless access points

So i got these new core switches, an upgrade from our existing 3560 core switch. I'm planning to set it up as usual core switch; vlans, custom routing, route internet traffic to router. just like that. But i found out that WLC is included in C9300, which means i don't need to buy a standalone WLC(ex. cisco 2504).

My question is that, how do i configure this? is it like a simple command for example enable wlc?  And what cisco AP does it support? What I imagine is that, you plugin those APs to c9300, C9300 discovers it, access c9300 WLC via web GUI and configure it there.

2 REPLIES 2
VIP Advisor

Re: Configure Cisco 9300 with wireless access points

here is the latest information : (i have not tested, last time when i installed 9300 saw feature in Fuji, but not got chance to test)

 

https://www.cisco.com/c/en/us/td/docs/wireless/controller/9800/config-guide/b_wl_16_10_cg/wireless-sub-package.html

 

some FAQ

 

https://www.cisco.com/c/dam/en/us/products/collateral/switches/catalyst-9000/nb-09-cat-9k-faq-cte-en.pdf

 

 

BB
*** Rate All Helpful Responses ***
Hall of Fame Community Legend

Re: Configure Cisco 9300 with wireless access points

From what I was told, the embedded WLC is supported from 16.11.1 (and later).
CreatePlease to create content
Content for Community-Ad
July's Community Spotlight Awards