07-22-2007 08:30 PM
Hi all,
I need to enable certain snmp traps and forward the snmp traps from a Catalyst Express 500 Switch to a network management host. How can I do this in the web interface for this switch? I can enable SNMP and also enter the community string. But how can I enable certain traps and send to a server management host?
Thanks.
sjong1122
07-27-2007 12:25 PM
Enable SNMP if you plan to have the switch managed through another network management application. By default, SNMP is disabled.
For more information on Configuring SNMP on Catalyst Express 500 Switch please click following URL:
http://www.cisco.com/en/US/products/ps6545/products_user_guide_chapter09186a0080531ea9.html#wp156418
07-27-2007 12:31 PM
You could try using the Trap Managers tab in the SNMP Management window under Device Properties of Cisco Network Assistant
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide