cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
429
Views
0
Helpful
3
Replies
Highlighted
Frequent Contributor

CUOM 2.3 to 8.6 hardware/software requirement

Hi Guys,

My Customer will do upgrade CUOM 2.3 to 8.6 and have the following doubt, about the hardware/software requeriment

                 

Hardware

-          4 vCPUs

·        16 GB de memória

·        100 GB de HD

Software

·        Windows 2008 32 bits

Virtualization

-  VMware ESXi 5.0.

This setup is correct? Are there support ESXi 5.0 to version CUOM 8.6?

Thanks,

Wilson

1 ACCEPTED SOLUTION

Accepted Solutions
Highlighted

Hi Wilson,

I found this in the install guide.

"Operations Manager supports VMware ESX 3.5 and  ESXi 4.x. Operations Manager must have the same system resources  available to it, inside the virtualization environment that it has for a  standard (nonvirtual) installation."

Thanks

View solution in original post

3 REPLIES 3
Highlighted
Enthusiast

Highlighted
Frequent Contributor

Hi ngoldwat,

I had already to saw the 03 links that You recommend. Not is clear that CUOM 8.6 is supported about ESXi 6.0, can be not is mentioned the requirement hardware that I showed above.

Thanks,

Wilson

Highlighted

Hi Wilson,

I found this in the install guide.

"Operations Manager supports VMware ESX 3.5 and  ESXi 4.x. Operations Manager must have the same system resources  available to it, inside the virtualization environment that it has for a  standard (nonvirtual) installation."

Thanks

View solution in original post

Content for Community-Ad