Hi CSC Team
CUOM Version 2.3 which shows multiple notifications per Device Alerts and Event with same time .
Does anyone have a solution for this problem
The message below is generated from the default All_Events for all devices
| 1. | Informational | 0000IM6 | 10.28.70.100 | IF-10.28.70.100/25 [E1 1/0] [AHD Connection to MOC] | OperationallyDown | 17-Mar-2011 10:36:13 | Cleared | 00004LY |
| 2. | Informational | 0000IJ3 | 10.28.70.100 | 10.28.70.100: Authentication Failure | MinorAlarm | 15-Mar-2011 19:16:42 | Cleared | 00004LY |
| 3. | Informational | 0000IJ1 | 10.28.70.100 | 10.28.70.100: Authentication Failure | MinorAlarm | 15-Mar-2011 19:05:42 | Active | 00004LY |
| 4. | Informational | 0000IIY | 10.28.70.100 | 10.28.70.100: Authentication Failure | MinorAlarm | 15-Mar-2011 16:44:42 | Cleared | 00004LY |
| 5. | Informational | 0000IIW | 10.28.70.100 | 10.28.70.100: Authentication Failure | MinorAlarm | 15-Mar-2011 16:34:10 | Active | 00004LY |
| 6. | Informational | 0000IHC | 10.28.70.100 | 10.28.70.100: Authentication Failure | MinorAlarm | 14-Mar-2011 20:27:42 | Cleared | 00004LY |
| 7. | Informational | 0000IHA | 10.28.70.100 | 10.28.70.100: Authentication Failure | MinorAlarm | 14-Mar-2011 20:17:16 | Active | 00004LY |
| 8. | Informational | 0000IFS | 10.28.70.100 | 10.28.70.100: Authentication Failure | MinorAlarm |
More event description are Minor Alarm ,Authentication Failure,OperationallyDown
Description: Interface card or network adapter operational state is not normal.
Trigger: Polling, or processed trap (see Processed SNMP Traps).
Note For interfaces, Operations Manager will only generate an OperationallyDown clear event if the card is reinserted into the same slot, and if the module index is the same before and after the card is reinserted.
Severity: Critical.
Device Type: Host, Hub, Router, Switch, or Optical Switch.
Event Code: 1018.
Recommended Action: Check the status of indicated interface, port, or card and investigate the root cause.
Note For interfaces, Operations Manager generates an OperationallyDown clear event only if the card is reinserted into the same slot, and if the module index is the same before and after the card is reinserted.
