After we completed the DFM upgrade from 2.0.6 to 2.0.10 on our LMS 2.6 bundle, the email notifications just stopped working. Fault History still shows the events or alerts are coming in but no emails are sent out.
Appreciate any help.
Solved! Go to Solution.
I have attached the Notification Group config and one sample event (OperationallyDown port) on my test switch. I am not too sure about where to get the output of the pdshow, I just attached the running services. I apologize if that's not the info you needed. Please let me know how to get it.
I verified and both are true. Hoping to find out more info, I enabled "debug" in logging and then simulated the OperationallyDown event. Maybe you can find other details there. Also, I manually tested sending email by selecting the "Notify" in the Alert and Activities window. I did get the email so it appears only the auto email is not working.
Attached are the logs. Thanks again.
I saw this once before where the EPM database becomes out of sync with itself. New events never trigger notifications because the event IDs are not what is expected. Try reinitializing the EPM database alone. You will lose all your current events, but notification and fault history will remain:
NMSROOT\bin\perl NMSROOT\bin\dbRestoreOrig.pl dsn=dfmEpm dmprefix=EPM
Here's what I did as advised:
Stopped the Ciscowork Daemon Manager
C:\Program Files\CSCOpx\bin>net stop crmdmgtd
The CiscoWorks Daemon Manager service is stopping...............................
The CiscoWorks Daemon Manager service was stopped successfully.
C:\Program Files\CSCOpx\bin>perl dbRestoreOrig.pl dsn=dfmEpm dmprefix=EPM
WARNING: Existing contents of dfmEpm database will be lost.
Do you want to continue [y/n]?y
dfmEpm database initialization is completed.
C:\Program Files\CSCOpx\bin>net start crmdmgtd
The CiscoWorks Daemon Manager service is starting.
The CiscoWorks Daemon Manager service was started successfully.
Re-booted the server...
Simulated the event. The Alert and Activities panel logged the alert/event but same problem - no auto email..
According to this, email should now be working:
11-Mar-2008|16:41:16.921|DEBUG|NOS|Email Notify Thread:Pooled Thread:1|EmailUtility|createAndSendMail()|.|
Mail was sent successfully to firstname.lastname@example.org
I suggest you check your SMTP server (10.108.51.42) to make sure it is relaying this mail. It may also be getting filtered in SPAM. The contents should be:
EVENT ID = 00000RW
ALERT ID = 00000RT
TIME = Tue 11-Mar-2008 15:59:12 EDT
STATUS = Active
SEVERITY = Critical
MANAGED OBJECT = 10.109.128.254
MANAGED OBJECT TYPE = Switches and Hubs
EVENT DESCRIPTION = OperationallyDown::Component=PORT-10.109.128.254/0.2 [Fa0/2];Type=ETHERNETCSMACD;OperStatus=DOWN;InterfaceCode=CODEUNKNOWN;DuplexMode=FULLDUPLEX;AdminStatus=UP;LastChangedAt=11-Mar-2008 3:59:12 PM;IsFlapping=false;MaxSpeed=100000000;Mode=NORMAL;
CUSTOMER IDENTIFICATION = IBC
CUSTOMER REVISION = 3.0