I have a DHCP server set up on a Cisco 2600 router. I am trying to push out a TFTP server address and filename with option 66,67. Option 66 for the server ip address works but I cannot get option 67 to work. When I type in the command it takes option 67 but it doesnt like the syntax of the filename. It gives me the following error.
DHCP does not allow raw option 67
I am putting in the option as an ascii term. The system states that it should be an NVT Ascii string but I cannot find to much information about the syntax of an NVT ascii string. Any help of additional information whould be great.
Listen: https://smarturl.it/CCRS9E25 Follow us: twitter.com/ciscochampions
With applications and users everywhere, the networks are now, more than ever, being tasked with delivering consistent protection while providing an exceptional user exper...
Listen: https://smarturl.it/CCRS9E24 Follow us: https://twitter.com/CiscoChampion
Cisco Radio Aware Routing addresses several of the challenges faced when merging IP routing and radio communications in mobile networks, especially those exhibiti...
Listen: https://smarturl.it/CCRS9E23 Follow us: https://twitter.com/CiscoChampion The Wi-Fi 6E Catalyst 9136 access point takes advantage of the 6-GHz band to produce a network that is more reliable and secure, with higher throughput, more ...
When moving from OSPFv2 to OSPFv3, there are many changes in the format of the LSAs Type, but the most known changes are: IP prefix informations are no longer carried in Type-1 LSA and Type-2 LSA, new LSAs Type 8 and 9 are added to carry these prefixes.
Read a preview of my book OSPF The ultimate for CCIE Enterprise and Infrastructure exam in Books Google Doc.
Read a preview of my book OSPF The ultimate for CCIE Enterprise and Infrastructure exam in Books Google Doc #CCIE #Cisco #exam #Enterprise ...