cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1678
Views
4
Helpful
2
Replies

Digital Optical Monitoring Transceiver SNMP monitoring C7206VXR NPE-G2

andrey.teslenko
Level 1
Level 1

Hello,

We have C7206VXR NPE-G2 platform with transceiver which support DOM.

Could we monitor DOM tx/rx level statistic through snmp for 7206 platform?

In CLI result of command "sh interf GigabitEthernet0/1 transceiver" give some information.

We tried search for some MIB In "MIB locator" on cisco.com.

The MIB CISCO-ENTITY-SENSOR-MIB is supported for:

Release: 12.2(33) SRE3

Platform: 7200-NPE-G2

Featur Set: SP Services

But there is no result on SNMP for these OIDs.

2 Replies 2

Marvin Rhoads
Hall of Fame
Hall of Fame

I believe the parameters you want should be available by using the CISCO-OPTICAL-MONITOR-MIB.

Thanks for response,

Unfortunaly parameters in tree 1.3.6.1.4.1.9.9.264 (CISCO-OPTICAL-MONITOR-MIB) did not available.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Innovations in Cisco Full Stack Observability - A new webinar from Cisco