10-14-2009 08:33 PM
I have few 1242 AP's which are in DCR of LMS3.1, I have Virtual-Dot11Radio0 showing up in all AP's and for this interfaces, I have Interface status as up and line protocol as down. due to this i m seeing alarms from these radios in DFM alerts and activities. I tried to unmanaged ie. "FALSE" for this interfaces and after that i applied the changes in DFM. For a time there status is unmanaged i.e FALSE but after sometime they are again showing up as managed and TRUE. and thus resulting in generation of alerts and events in DFM, Moreover when i telnet the AP and change the status of Virtual radio to shutdown, it doesnt allow.
AP's are running on c1240-k9w7-mx.123-8.JA2
DFM version is 3.1.3
TIA
Hitesh Vinzoda
Solved! Go to Solution.
10-14-2009 09:44 PM
This is CSCsz08953. A patch for DFM 3.1.3 is available at http://tools.cisco.com/support/downloads/go/ImageList.x?relVer=3.1.3&mdfid=282253615&sftType=CiscoWorks+Device+Fault+Manager+Patches&optPlat=Windows&nodecount=2&edesignator=null&modelName=CiscoWorks+Device+Fault+Manager+3.1&treeMdfId=268439477&treeNa... . Download the consolidated patch for CSCta56151.
10-14-2009 09:44 PM
This is CSCsz08953. A patch for DFM 3.1.3 is available at http://tools.cisco.com/support/downloads/go/ImageList.x?relVer=3.1.3&mdfid=282253615&sftType=CiscoWorks+Device+Fault+Manager+Patches&optPlat=Windows&nodecount=2&edesignator=null&modelName=CiscoWorks+Device+Fault+Manager+3.1&treeMdfId=268439477&treeNa... . Download the consolidated patch for CSCta56151.
10-15-2009 01:12 AM
Hi,
Issue seems to be resolved after the patch installation.
Thanks a lot
Hitesh Vinzoda
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide