cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
Popup Hotspot Using ISR 1000 with WiFi/LTE for Teleworkers and Micro Branchesr
173
Views
10
Helpful
2
Replies
Highlighted
Explorer

EEM Configuration please confirm correct

Hello,

 

I have created the following EEM but it never triggers. Can anyone see where I might have made a mistake in my syntax?

Here is what I have used for the trigger:

*Jun 11 13:46:45.177: %SNMP-3-INPUT_QFULL_ERR: Packet dropped due to input
queue full
*Jun 11 13:46:52.865: %SNMP-3-INPUT_QFULL_ERR: Packet dropped due to input
queue full
*Jun 11 13:47:04.238: %SNMP-3-INPUT_QFULL_ERR: Packet dropped due to input
queue full

 

______________________My EEM____________________________
event manager applet SNMP_Restart
event syslog pattern "%SNMP-3-INPUT_QFULL_ERR: Packet dropped due to input queue full"
action 1.0 cli command "enable"
action 1.5 cli command "config t"
action 2.0 cli command "no snmp-server"
action 2.5 cli command "end"
action 3.0 cli command "config t"
action 3.1 cli command "snmp-server group xxx v3 priv"
action 3.2 cli command "snmp-server community xxxxx RO SNMP-ACL"
action 3.3 cli command "snmp-server community xxxxx RO SNMP-ACL"
action 3.4 cli command "snmp-server host x.x.x.x version 3 priv xxx"
action 3.5 syslog msg "SNMP restarted via EEM"
action 3.6 cli command "end"
action 4.0 cli command "wr mem"

Everyone's tags (1)
2 REPLIES 2
Highlighted
Rising star
Rising star

Re: EEM Configuration please confirm correct

Hi 

The script looks fine to me. 

It may need "authorization bypass".

event manager applet SNMP_Restart authorization bypass

 

hope this helps. 

 

 

Highlighted
Rising star
Rising star

Re: EEM Configuration please confirm correct

Just to add .. %SNMP-3-INPUT_QFULL_ERR is a well-known issue and documented under various bug ids on different IOS. You may want to check the software version and upgrade. 

CreatePlease to create content
Content for Community-Ad