cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1904
Views
0
Helpful
6
Replies

EEM on 3550 Switch

It looks like the 12.2(52) release is able to run EEM. This only seems to be currently available for the WS-3550-24-DC-SMI model but I have that image loaded on a WS-3550-PWR-EMI:

Cisco IOS Software, C3550 Software (C3550-IPSERVICESK9-M), Version 12.2(52)SE, RELEASE SOFTWARE (fc3)

Copyright (c) 1986-2009 by Cisco Systems, Inc.

Compiled Fri 25-Sep-09 09:05 by sasyamal

Image text-base: 0x00003000, data-base: 0x015DB684

ROM: Bootstrap program is C3550 boot loader

Switch uptime is 22 minutes

System returned to ROM by power-on

System image file is "flash:/c3550-ipservicesk9-mz.122-52.SE.bin"

...output omitted...

Cisco WS-C3550-24-PWR (PowerPC) processor (revision G0) with 65526K/8192K bytes of memory.

...output omitted...

Running Layer2/3 Switching Image

...output omitted...

Model number: WS-C3550-24PWR-EMI

Embedded Event Manager Version 3.20

Component Versions:

eem: (v320_throttle)2.1.50

eem-gold: (v320_throttle)1.0.4

eem-call-home: (v320_throttle)1.0.4

Event Detectors:

Name                  Version   Node        Type

application             01.00     node0/0     RP

neighbor-discovery  01.00     node0/0     RP

identity                  01.00     node0/0     RP

mat                       01.00     node0/0     RP

syslog                   01.00     node0/0     RP

routing                   03.00     node0/0     RP

cli                           01.00     node0/0     RP

counter                  01.00     node0/0     RP

interface                 01.00     node0/0     RP

ioswdsysmon         01.00     node0/0     RP

none                     01.00     node0/0     RP

oir                        01.00     node0/0     RP

snmp                    01.00     node0/0     RP

snmp-object          01.00     node0/0     RP

ipsla                     01.00     node0/0     RP

snmp-notification    01.00     node0/0     RP

timer                    01.00     node0/0     RP

rpc                       01.00     node0/0     RP

This is in a lab environment but it seems to be holding up fine. Does anyone know if they will release this image for the other 3550 models? Has anyone tested with this image yet, either on the 3550-24-DC-SMI model or any other model?

Thanks for your help.

6 Replies 6

Joe Clarke
Hall of Fame Cisco Employee Hall of Fame Cisco Employee
Hall of Fame Cisco Employee

Essentially, all but the DC 3550s are end of life, so no new images are being released.  However, all 3550s run the same image.  In fact, I loaded 12.2(52)SE on my WS-C3550-24-SMI, and it works just fine.  I have been doing quite a bit of EEM work on this switch so I could build solutions using the new EDs.

This is excellent news. We have a large amount of 3550's installed, and we could use EEM at many of these locations. What would be the best source for documentation? I can see that the event detectors are somewhat different from those available in the ISRs. The "track" ED is gone but the "mat" and "neighbor-discovery" EDs look very interesting. Would the config guides for the 3560 switches be applicable?

Joe, thanks for all of your help.

EDIT: I found the eem version 3.2 release notes and config guides. Thanks.

Joe Clarke