10-14-2014 11:54 PM
am trying to execute below script and its failing can some one help?
event manager applet nano-1
event syslog pattern "%CISCO400R-6-SIM_ACTIVATION: SIM in slot 1 is being activated. Please wait for modem to come UP."
action 1.0 cli command "enable"
action 1.1 cli command "configure term"
action 1.2 cli command "do cellular 0/0/0 microcode activate 2"
event manager applet nano-2
event syslog pattern "%CISCO400R-6-SIM_ACTIVATION: SIM in slot 0 is being activated. Please wait for modem to come UP."
action 1.0 cli command "enable
action 1.1 cli command "configure term"
action 1.2 cli command "do cellular 0/0/0 microcode activate 4"
10-14-2014 11:55 PM
is it like EEM script only detect Sev5 sys log messages?
10-15-2014 11:51 AM
Try the EEM policy without the % sign in the syslog pattern.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: