cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

167
Views
0
Helpful
7
Replies
Beginner

error for copy disk:/defaultRepo

hello ,

i have a problem with copy file from disk:/defaultRepo to one repository that i make in disk:/file .

I use from below command :

# copy disk:/defaultRepo/VER3.3.0.303.107_BKSZ19G_CPU8_MEM3G_RAM15G_SWAP15G_APP_CK3353207043.tar.gpg ftp://reportsOnDemand
Username: admin
Password:
% Error: Transfer failed

but i recieve error : % Error: Transfer failed

can anyone help me?

 

thanks

7 REPLIES 7
Rising star

Re: error for copy disk:/defaultRepo

I notice there is no IP-address in the FTP-url?

copy disk:/defaultRepo/<filename> ftp://111.222.333.444/reportsOnDemand

or is reportsOnDemand a DNS-entry that resolves to an ip-address?

 

you can also add the location as a new repository

repository RemoteRepo
  url ftp://111.222.333.444
  user RepoUser password hash aabbccddeeffgghhiijjkkllmmnn

 

then list the repository to check if you can access it.

show repository RemoteRepo

then copy a file

copy disk:/defaultRepo/<filename> repository RemoteRepo

Highlighted
Beginner

Re: error for copy disk:/defaultRepo

at first i want copy backup file into internal disk of prime , and then see backup with software ''Winscp '' and copy it to my pc .
can i without ftp server , take backup ?
Rising star

Re: error for copy disk:/defaultRepo

you want a disk-to-disk copy?, that should be no problem

then you should not use ftp://... in the destination but also a disk+directory

Beginner

Re: error for copy disk:/defaultRepo

thanks for your answer.

can you help me , after updating , how can i restore my backup from my repository or my ftp server?

with wich command ?

 

thanks alot

Beginner

Re: error for copy disk:/defaultRepo

and how can restore backup from cisco prime v3.3 to cisco prime version 3.5 ?
Rising star

Re: error for copy disk:/defaultRepo

I suggest you read the Prime Infrastructure 3.5 quick start guide.

in this document is descried how to make your backup and how to restore this.

You can also try to do an "in-line-upgrade" where you do not need to restore

(i would take the backup anyway,  if anything goes wrong, you can do a fresh installation and restore)

 

reed the section that starts with 

You can upgrade the following 3.1.x, 3.2.x, 3.3.x and 3.4.x Prime Infrastructure versions to Prime Infrastructure 3.5:

and check your running version is listed.

Beginner

Re: error for copy disk:/defaultRepo

thanks alot.
CreatePlease to create content
Content for Community-Ad
July's Community Spotlight Awards