01-02-2013 05:43 AM
Hello,
I have grouped some IE 3000 switches which are not updated automatically when new devices are added.
Here are the rules used:
Device.Image.Version equals "12.2(55)SE3" AND
Device.Chassis.Model_Name equals "IE-3000-4TC"
Membership Update Automatic and Visibility Scope Public are checked.
Others rules for ME3750, C3560, C3550, C2950 and C2960 are also not group updating.
Can you tell me how I can fix this?
Thanks.
Tesema
01-02-2013 10:31 AM
Where do you wish to see these devices, under group. basically the devices to appear in User defined group should be made under common servces > group.
The above settings seems to be under RME groups. Please check in RME, if these devices comes under correct groups. As per rule, the device should only be a part of group once te inventory is done.
To confirm things are similar as per rule, try checking the Invenotry report to match device details.
01-03-2013 04:30 AM
Hello,
Yes, that is correct that the rules are made under RME. I have made a group name “IE-3000-4TC” as a container without any rule. Then under “IE-3000-4TC” there is a group “IE3000-12.2(55)SE3” with the mentioned rule. Both of them are under “User Defined Groups”.
Today, I have tried in CS but there is no a choice such as Image.Version as in RME. Making rules with Model or/and Series in CM does not work or not sorting the type of switches.
There are no changes in RME Report Generator.
Thanks
Tesema
02-04-2013 06:55 AM
Hello,
I have solved this by deleting the old groups and creat groups again. This has increased to the actual number of devices in each group. But this is not a permanent solution so I will be grateful if you guys have a better solution.
Tesema
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide