07-02-2016 09:20 AM
Hello,
Im working on getting a cisco aironet 1830 controller/acces point ready to drop in on our network. In the past ive used standalone 1600's where I was able to configure mac filtering and apply those filters to particular vlans. I dont see this option in the cisco mobililty express gui, and was hoping someone may be able to get me out. I need to be able to only allow certain users to connect to certain wlans. Problem is i give the key to one person who I would like to allow, and then that key gets password around to other users who I dont want to be able to connect to that wlan. I see there is a firewall option within the mobility express controller, but not sure if thats going to accomplish what i need or not. Thanks in advance for any help on this.
Solved! Go to Solution.
01-20-2017 12:26 PM
I know its an old thread but in case someone runs across this link... take a look at this link. CLI supported but GUI supported in 8.4 which will be release in March give or take.
https://supportforums.cisco.com/discussion/13025671/mac-filtering-wireless-mobility-express
01-20-2017 12:26 PM
I know its an old thread but in case someone runs across this link... take a look at this link. CLI supported but GUI supported in 8.4 which will be release in March give or take.
https://supportforums.cisco.com/discussion/13025671/mac-filtering-wireless-mobility-express
01-20-2017 12:37 PM
Thank you for your reply, I did find the cli command options awhile back and was able to get working. Good to know they've got some more gui options coming in later releases.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide