cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

Cisco Community Designated VIP Class of 2020

650
Views
0
Helpful
3
Replies
Beginner

How to configure NETCONF in routers and switches cisco?

Hi friends,

 

I would like to know, how to configure NETCONF in routers and switches cisco? Is there a procedure?

 

With which Cisco devices can NETCONF be used? Is there a list of devices that accepts it?

 

Best regards,

3 REPLIES 3
VIP Advisor

Re: How to configure NETCONF in routers and switches cisco?

You can start from here :

 

https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/cns/configuration/15-mt/cns-15-mt-book/cns-netconf.html

 

BB
*** Rate All Helpful Responses ***
Hall of Fame Cisco Employee

Re: How to configure NETCONF in routers and switches cisco?

This is legacy NETCONF.  I would strongly recommend not using it unless you absolutely cannot use YANG-based NETCONF on the newer platforms.

Highlighted
Hall of Fame Cisco Employee

Re: How to configure NETCONF in routers and switches cisco?

Cisco devices now support YANG-based NETCONF, which is where the overall industry is heading.  While legacy NETCONF has been around since IOS 12.4, the new YANG requires 16.x for IOS-XE (no legacy IOS support), and is also available in IOS-XR and NX-OS.

See https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/prog/configuration/166/b_166_programmability_cg/configuring_yang_datamodel.html as a starting point for data-model-based NETCONF.  There are also a number of labs on DevNet to help get you comfortable with this.  For example, have a look at https://learninglabs.cisco.com/labs/tags/NETCONF .

CreatePlease to create content
Content for Community-Ad
July's Community Spotlight Awards