cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1090
Views
5
Helpful
3
Replies

how to generate logs for packet loss using ip sla or track command

paragparekh85
Level 1
Level 1

how to generate logs for packet loss using ip sla or track command

3 Replies 3

syekhali
Level 1
Level 1

Hi Parag,

You could use the reaction configuration feature to generate the syslogs whenever there is a packet loss.

Following is a sample config

ip sla reaction-configuration 1 react packetLossDS action-type trapOnly threshold-type immediate threshold-value 30

ip sla reaction-configuration 1 react packetLossSD action-type trapOnly threshold-type immediate threshold-value 30

make sure you have the rtr traps enabled on the device. Whenever the device is violating the threshold of 30 packetlosses between the SD and DS there would be a trap generated for the same to your NMS.

Regards,

Syed Khalid

thanks syed.  it worked

Hey Parag,

Good to know. Please rate the post since it has been helpful to resolve your concern.

Regards,

Syed Khalid

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Innovations in Cisco Full Stack Observability - A new webinar from Cisco