cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
Community Live
1887
Views
0
Helpful
4
Replies
Ru Song Fu
Beginner

How to use EEM to monitor 6509 FWSM module

I have a 6509E+VS720, running version ios 15.1(1), I think when firewall module Online Diag Status is unknow,EEM can automatic shutdown vlan2, excuse me how should I do? appreciate!!

event manager applet FWSMdown

event (I don't know how to set,please help)

action 1.0 cli command "en"

action 2.0 cli command "confi t"

action 3.0 cli command "int vlan2"

action 4.0 cli command "shut"

This is normal:

nor.jpg

this is fail:

bad.jpg

4 REPLIES 4
avayner
Beginner

Is there some syslog event that usually happens when the module goes into "Other"?

If we can identify such a syslog event, that can be used as a trigger for the EEM applet.

If we can't find such a trigger, we can try and monitor that periodically... What IOS version do you have on this device?

Supervisor is VS-S720-10G-3C,IOS Version is:s72033-advipservicesk9-mz.151-1.SY.bin.

Do you have any specific syslog messages that happen when this situation occurs?

I understand syslog can do it,But different crash way may appear different syslog, syslog sometimes can not very accurate reflection of the module fault。