02-19-2013 01:22 AM
Hi,
I was trying to install LMS SP1 on my solaris 10 box
I have a newer Patch-Cluster installed, than the one requested
Can someone tell me whats wrong and which Solaris Patch is to old or missing
thanks in advance
Martin
Error:
WARNING: Exiting installation beyond this point might result in system instability.
Do you want to continue the installation? (y/n) [y]:
INFO: Verifying image for package CSCOxrts...OK.
INFO: Verifying image for package CSCOsnmp...OK.
INFO: Verifying image for package CSCOapch...OK.
INFO: Verifying image for package CSCOsjre...OK.
INFO: Verifying image for package CSCOtmct...OK.
INFO: Verifying image for package CSCObtk...OK.
INFO: Verifying image for package CSCOchaud...OK.
INFO: Verifying image for package CSCOclifw...OK.
INFO: Verifying image for package CSCOrmcmn...
ERROR: The following base package image is bad: CSCOrmcmn.
INFO: Verifying image for package CSCOrmedb...OK.
INFO: Verifying image for package CSCOrmhlp...OK.
INFO: Verifying image for package CSCOrmutl...OK.
INFO: Verifying image for package CSCOruii...OK.
INFO: Verifying image for package CSCOsla...OK.
INFO: Verifying image for package CSCOswimg...OK.
INFO: Verifying image for package CSCOrmextn...OK.
=================================================================
Finished: Tue Feb 19 10:13:24 CET 2013
=================================================================
===============- Software Installation Tool Completed -==============
=================================================================
===================- Possible Warnings/Errors Encountered -===================
WARNING: Automatic data backup do not happen during this installation.
WARNING: We recommend you to take a backup of data before starting this installation.
WARNING: Ensure that you have installed the recommended Solaris 10 cluster patches released
WARNING: on Apr/17/07, in this server.
WARNING: If these cluster patches are not installed, please download and install them
WARNING: from http://www.sun.com/.
WARNING: Otherwise, some features of the CiscoWorks applications will not function properly.
WARNING: Exiting installation beyond this point might result in system instability.
ERROR: The following base package image is bad: CSCOrmcmn.
=====================================================================
02-19-2013 11:09 PM
Thanks, but i opened a TAC Case for that
02-20-2013 05:57 AM
Hi Cisco Documentation Says
Check whether the package has been corrupted or not by running the below command.
pkgchk -d
where,
Example:
pkgchk -d /data/lms30/disk1/packages CSCOjch
For Reference See Link
***Do Rate Helpful Posts***
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide