cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
314
Views
0
Helpful
0
Replies

Integration New Cisco solution

Dear all, 

I have taken over a network configuration from a customer with mixed devices of different brands (from router, firewall switch and access point) there is no product of the same brand.

I bought a meraki mx as router/firewall with advanced (protection) licenses and catalyst 1300 switches series for the network distrib. I will have to configure as new one, vlans for all devices and services.

Management, servers, printers, wifi (mobile dev + corp laptops and guest) and for sure, I will have to configure a "temp" vlan for the actual network that is working (all on a single subnet).

Advice on how to configure the new network (segregate)?
correct to create a vlan for the network that is working?

Second step, I will have to integrate a new server, and then move the services and all PCs to the new vlans and power off legacy network infrastructure.

For the switch part, I also purchased the CBD license (I will configure the network first and then adopt the switches).

I will also appreciate links to manuals or how-to's of various kinds to support configurations of MX and CBD/Switches.

thank you in advance.

BR 

Alessandro.

 

0 Replies 0