How do I clear out a IP SLA test set in the router via the RTT Mon MIB? What OID's would I use or is there an IOS command from router?
Here's an output from jitter test created by NMS via RTT MON MIB.
TBVTRTR1#sh ip sla configuration 2422
IP SLAs Infrastructure Engine-III
Entry number: 2422
Owner: VF APAC Jitter! Test Template_172.29.20.26
Tag: SPM@ITGC2W000145
Operation timeout (milliseconds): 10000
Type of operation to perform: udp-jitter
Target address/Source address: 172.30.160.46/0.0.0.0
Target port/Source port: 16386/0
Type Of Service parameter: 0xB8
Codec Type: g711ulaw
Codec Number Of Packets: 1000
Codec Packet Size: 172
Codec Interval (milliseconds): 20
Advantage Factor: 0
Verify data: No
Vrf Name:
Control Packets: enabled
Schedule:
Operation frequency (seconds): 21 (not considered if randomly scheduled)
Next Scheduled Start Time: Start Time already passed
Group Scheduled : FALSE
Randomly Scheduled : FALSE
Life (seconds): 11
Entry Ageout (seconds): never
Recurring (Starting Everyday): FALSE
Status of entry (SNMP RowStatus): notInService
Threshold (milliseconds): 5000
Distribution Statistics:
Number of statistic hours kept: 2
Number of statistic distribution buckets kept: 1
Statistic distribution interval (milliseconds): 20
Enhanced History:
