08-11-2014 03:31 AM
Hello,
I was trying to add a firewall ASA 5545-X with image 9.0.3 to prime infra 2.1 and faced below error message in firewall logs,
incoming SNMP request (584 bytes) from IP address <PI IP ADD> Port 14796 Interface "<int-name>" exceeds data buffer size, discarding this SNMP request.
SNMP configuration is okay in ASA and PI. While I was searching for similar cases, I came across below thread,
https://supportforums.cisco.com/discussion/11761921/exceeds-data-buffer-size-discarding-snmp-request
Similar issue but related to LMS and no workaround.
Just wanted to know, if anyone has experienced similar issue and what was the workaround/solution.
Many Thanks,
Girish
Solved! Go to Solution.
08-11-2014 05:26 PM
Hi Girish,
This is a device side BUG,
08-11-2014 05:26 PM
Hi Girish,
This is a device side BUG,
08-13-2014 05:02 AM
Hi afrahmad,
We upgraded the firewall image to 9.3(1) and reconfigured the SNMP and it started working. Prime Infrastructure now can poll the ASA for status and configuration archiving.
Thank for your response, much appreciated.
Regards,
Girish
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide