Hi Cisco Community,
I need help and advise.
I have an issue with Cisco 3560V2-24-PS which it indicates not supported in DFM. I can see the device working properly when I do snmpwalk and snmv3 test and device credential test. In fact I can see chassis view of this device.
IP Address = 10.10.1.60
DNS Name = DISTRI_SW02
Device Status = Unknown
Device Type = N/A
Aliases = N/A
Containments = N/A
DFM Processing = N/A
Time Last Discovered = N/A
Import Time Stamp = 10-Oct-2012 16:36:57
*** Data Collector Status Information ***
Error Code = Unsupported
Error Message = N/A
But in LMS 3.2 supported device it indicates as supported. Current version of the switch is
12.2(58)SE2 which is higher than the minimum requirement 12.2(50)SE1. I tried to downgrade/upgrade IOS and still no luck.
As per information in the creent DFM (see below), it is supposedly supported
| 59. | 1.3.6.1.4.1.9.1.1023 | Cisco Catalyst 3750V2-24PS Switch | DFMDeviceUpdates | 19.0 |
Below is the current version of the LMS modules;
| Products Installed | |||||
 | |||||
| Showing 1-9 of 9 records | |||||
Product Name  | Version With Patch Level | Installed Date | |||
| 1. | Campus Manager | 5.2.1 | 10 Oct 2012, 13:11:57 GMT+08:00 | ||
| 2. | CiscoView | 6.1.9 | 10 Oct 2012, 11:27:52 GMT+08:00 | ||
| 3. | CiscoWorks Assistant | 1.2.0 | 10 Oct 2012, 11:27:52 GMT+08:00 | ||
| 4. | CiscoWorks Common Services | 3.3.0 | 10 Oct 2012, 11:27:52 GMT+08:00 | ||
| 5. | Device Fault Manager | 3.2.0 | 10 Oct 2012, 11:27:52 GMT+08:00 | ||
| 6. | Integration Utility | 1.9.0 | 10 Oct 2012, 11:27:53 GMT+08:00 | ||
| 7. | Internetwork Performance Monitor | 4.2.0 | 10 Oct 2012, 11:27:53 GMT+08:00 | ||
| 8. | LMS Portal | 1.2.0 | 10 Oct 2012, 11:27:53 GMT+08:00 | ||
| 9. | Resource Manager Essentials | 4.3.1 | 10 Oct 2012, 13:17:50 GMT+08:00 | ||
Also my current device update.
I already downloaded all the patches online and all device updates were also updated.todate. Am doin this to stage teh issue one of our clients are facing.
Appreciate anybody's help. Thank you.
Louie
