cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
750
Views
0
Helpful
0
Replies
hgans
Beginner

LMS 4.1 Auto Smartport: No User defined Event possible?

I want to create an User Defined Event Trigger, so that my Switches are able to apply an Auto Smartport Template based on a MAB or 802.1x Radius attribute instead of the default CDP or MAC based Event Triggers.

This is possible as stated in the Auto Smartport documentation:

When using MAB or 802.1x authentication as an event trigger, create a  trigger that corresponds to the Cisco attribute-value pair  (auto-smart-port=event trigger) sent by the RADIUS server.

Switch(config)# !!! first create the trigger event
Switch(config)# shell trigger RADIUS_MAB_EVENT MAC_AuthBypass EventSwitch(config)#!!! map a system defined macro to the trigger event
Switch(config)# macro auto execute RADIUS_MAB_EVENT builtin CISCO_AP_AUTO_SMARTPORT ACCESS_VLAN=10

But I am not able to find this possibility to configure in the Template Masks of the LMS Auto Smartport Work Center.

Am I missing something or is this not implemented in the LMS Workflows?

Thanks in advance for help!

0 REPLIES 0
Content for Community-Ad