10-10-2013 04:42 AM
Hello everyone,
One of our end clients noticed that there is a "No records" message when choosing to show syslog messages for all devices that are configured on his LMS.
Under "LMS - Admin > System > Server Monitoring > Processes" I can see that the "SyslogAnalyzer" and "SyslogCollector" are showing as "Running normally"
Also see attached screenshot:
I would really appreciate your advise on this issue.
Solved! Go to Solution.
10-20-2013 07:46 AM
Hello Ahmad,
Thank you for all your help so far.
Right now all the filters are DISABLED and set to KEEP.
I didnt receive any updates from my client if the messages are still being filtered ever since we changed the settings.
Are you positive that only source of the issue are the Message Filter Settings?
Thanks again,
Daniel
10-20-2013 10:08 AM
Yes Daniel I am sure it is the filter setting issue , however I can suggest one more thing.
Admin > Network > Notification and Action Settings > Syslog Message Filters
Click Create >> select all the devices \ all managed devices >> and in the next window
(Define New Message Type) >> let all the fields as * >> click SAVE and ADD
now you should be able to see a new Entry in the Filter settings.
SET KEEP and ENABLED
Thanks-
Afroz
10-21-2013 05:32 AM
Hello Ahmed!
Im glad to inform you that issue was resolved after playing with the filttering settings and rebooting the server itself.
Thanks again for all your help, really appreciate it!
10-21-2013 07:21 AM
That's Great
Kindly Mark it resolved ..
Thanks-
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide