05-01-2014 08:40 AM
Hi,
we would like to create a daily report for checking (by user-tracking function) mac-address list on the network.
I try to use “report designer” on “report” dashboard without any success. Could you help us to provide or create a method for applying a report job every day for checking our mac-address list
Thanks in advance.
Solved! Go to Solution.
05-02-2014 07:13 AM
you can't put your end host list there.. that is not an option.
you need to select the devices or device type group
Thanks-
Afroz
05-01-2014 09:00 AM
Hi ,
how about "All Host Entries" report ?
Reports > Inventory > User Tracking > All Host Entries
can you check and see if it help
Thanks-
Afroz
***Ratings Encourages Contributors ****
05-01-2014 09:07 AM
Thank Afroz but how i can run the job for a specific list of mac-address ( 26 mac-adress) that i would like to check if its exist on the network. I dont want to do it for all host entries.
Thanks
05-01-2014 09:33 AM
you can do the following
1. -create a quick report {Reports > Inventory > User Tracking > Quick Report}
2.export the last report which I suggested and filter the MAC address you are interested in
3. you can create a Custom report {Reports > Report Designer > User Tracking > Custom Reports } as per your need.
Thanks-
Afroz
*** Ratings Encourages Contributors ****
05-01-2014 10:27 AM
Thanks Afroz.
Its not exactly that i need to do. If i look process. I have to do a "quick report" for each mac-adress.... correct ?
All my mac-address are in a bloc note file.
If i check last suggestion :
1. -create a quick report {Reports > Inventory > User Tracking > Quick Report}
Do i have to do it Mac adress by Mac address ?
2.export the last report which I suggested and filter the MAC address you are interested in
I dont want to have a report for all host ...
3. you can create a Custom report {Reports > Report Designer > User Tracking [4] > Custom Reports } as per your need.
i try but it doen't work ... could you give more detail about steo by step ..creation ?
Thanks in advance.
Regards
05-01-2014 09:01 PM
05-02-2014 07:06 AM
Thanks. Afroz.
But i have one step "groupe selection" before ... and how i can put my end host list inside...note that i have list of mac address whose end host
05-02-2014 07:13 AM
you can't put your end host list there.. that is not an option.
you need to select the devices or device type group
Thanks-
Afroz
05-14-2014 06:42 AM
Thanks Afroz for your help.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide