LMS 4.2.5 Netshow report failure for two devices with authentication and connection issue.

[Laxmi Khajjannavar]

Hi,

We have 6 Nexus 7K switches with the same credential but job is failing for only 2 Switches. Checked creating the device credentials verification job for both devices.The job got failed  saying Telnet (Protocol not configured.) and SSH (Incorrect).

Netshow Job failed with below error message

Error :Config _CDL1031:Transport session to the devices failed.Failed to establish the session on SSH connection and telnet.

Any help with the above would be appreciated

Thanks

Laxmi

[Laxmi Khajjannavar]

Have verified the switch configuration  and found that telnet is disable.But ,what could be the issue with SSH.

Need help.

Thanks

Laxmi