cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
278
Views
0
Helpful
1
Replies
Highlighted
Beginner

LMS 4.2.5 - UserTracking Connected End Host Report not useable

Hi all,

 

trying to understand the different available UserTracking-Reports (Active End Host Report, Dormant End Host, Connected End Host) provided by UserTracking Summary Portlet I struggled with understanding the Connected End Host Report.

 

In Docs an End Host in status connected is: End hosts that are connected to the network but do not have its MAC address entry in the connected switch CAM table.

 

Executing this Connected End Hosts Report I'm not able to understand the output:

       User Name    MAC Address    Host Name    IP Address    Subnet    Status    Switch    	Port    VLAN    	Last Seen     
1.                							Connected       	Fa0/2  	AK-ETH23 	14 Dec 2014, 05:17:44 
2.                							Connected       	Fa0/13  VLAN0178 	14 Dec 2014, 05:17:44 
3.                							Connected      	 	Gi0/15  inactive400 	14 Dec 2014, 05:17:44  
4.                							Connected       	Fa4/13  VLAN0924 	14 Dec 2014, 05:17:44  
5.                							Connected       	Gi0/18  inactive400 	14 Dec 2014, 05:17:44 

 

With this output nobody is able to correlate anything; simply a port and a vlan is seen, but no endhost-information/switch or switchport information!

As this can be seen on different LMS installations, it seems to be a general issue.

 

Anybody out the having further information?

 

Thanks for your valued feedback.

 

Lothar

 

1 REPLY 1
Highlighted
Beginner

Still no explanation from the experts?

 

Thanks

 

Lothar

Content for Community-Ad