11-18-2013 01:40 AM
Hi
I useLMS 4.2, In fault Monitor I have the folowing messages :
Event_Description | StateNotNormal |
Device IP | 10.92.8.142 |
Device Type | Switches and Hubs |
Fault Last Updated At | 17-Nov-2013 12:36:25 |
Component | PWR-I@/2058 [Sw2, PS1 Faulty, RPS NotExist] |
Component Class | PowerSupply |
Component Event Code | 1085 |
Event Category | Environment |
Event Source | DFM |
Status | CRITICAL |
cisco Env Mon Supply State | 6 --> I have just 4 (not 6) |
But when I check in thw switch everything is ok :
#sh env all
FAN 1 is OK
FAN 2 is OK
FAN PS-1 is OK
FAN PS-2 is OK
SYSTEM TEMPERATURE is OK
System Temperature Value: 30 Degree Celsius
System Temperature State: GREEN
Yellow Threshold : 46 Degree Celsius
Red Threshold : 60 Degree Celsius
SW PID Serial# Status Sys Pwr PoE Pwr Watts
--- ------------------ ---------- --------------- ------- ------- -----
1A C3KX-PWR-715WAC LIT170517XR OK Good Good 715/0
1B C3KX-PWR-715WAC LIT1705180V OK Good Good 715/0
2A C3KX-PWR-715WAC LIT170517UY OK Good Good 715/0
2B Not Present
3A C3KX-PWR-715WAC LIT170518XH OK Good Good 715/0
3B Not Present
SW Status RPS Name RPS Serial# RPS Port#
-- ------------- ---------------- ----------- ---------
1 Not Present <>
2 Not Present <>
3 Not Present <>
#sh stack-power de
Power Stack Stack Stack Total Rsvd Alloc Unused Num Num
Name Mode Topolgy Pwr(W) Pwr(W) Pwr(W) Pwr(W) SW PS
-------------------- ------ ------- ------ ------ ------ ------ --- ---
SP-1 SP-PS Ring 2860 31 669 2160 3 4
Power stack name: SP-1
Stack mode: Power sharing
Stack topology: Ring
Switch 1:
Power budget: 943
Power allocated: 223
Low port priority value: 20
High port priority value: 11
Switch priority value: 2
Port 1 status: Connected
Port 2 status: Connected
Neighbor on port 1: Switch 3 - 7cad.7416.0680
Neighbor on port 2: Switch 2 - acf2.c5c1.4600
Switch 2:
Power budget: 943
Power allocated: 223
Low port priority value: 22
High port priority value: 13
Switch priority value: 4
Port 1 status: Connected
Port 2 status: Connected
Neighbor on port 1: Switch 1 - 4c4e.359b.c900
Neighbor on port 2: Switch 3 - 7cad.7416.0680
Switch 3:
Power budget: 943
Power allocated: 223
Low port priority value: 21
High port priority value: 12
Switch priority value: 3
Port 1 status: Connected
Port 2 status: Connected
Neighbor on port 1: Switch 2 - acf2.c5c1.4600
Neighbor on port 2: Switch 1 - 4c4e.359b.c900
I don't find any bug for this ussue.
someone has an idea?
Many thans for your help
Solved! Go to Solution.
11-19-2013 07:44 PM
This seems to be a BUG ,there are few alredy filed for 2960's and 3750's.
CSCtx16194 C3750 stack switches ciscoEnvMonSupplyState returns notFunctioning
CSCuj56140 SE5:Power supply status is wrong when dual power supply is removed
CSCti27620 SNMP trap and snmp walk don't reflect correct status for power supply
CSCtq97867 SNMP Generating "Faulty" status for Power supply when PS is inserted
this is a device side issue.
Thanks-
Afroz
11-19-2013 07:44 PM
This seems to be a BUG ,there are few alredy filed for 2960's and 3750's.
CSCtx16194 C3750 stack switches ciscoEnvMonSupplyState returns notFunctioning
CSCuj56140 SE5:Power supply status is wrong when dual power supply is removed
CSCti27620 SNMP trap and snmp walk don't reflect correct status for power supply
CSCtq97867 SNMP Generating "Faulty" status for Power supply when PS is inserted
this is a device side issue.
Thanks-
Afroz
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: